YXWD Power Plant Stainless Steel Instrument Insulation Box

YXWD Power Plant Stainless Steel Instrument Insulation Box

A brief description: The instrument incubator is equipped with precision instruments such as transmitters, flow meters, temperature meters, etc. It is mostly used in pipelines such as power plants and chemical plants. It is limited to ensure accurate data values and prolong the service life of the instrument in harsh environments. The incubator is equipped with a power supply, a heater, a temperature control switch, and an instrument mounting bracket. It can also be equipped with internal lighting, heat supply outside the box, terminal block and power box. 1. On-site stainless steel instrument incubator has 20mm thick flame-retardant insulation layer on the six sides. The material has the advantages of small thermal conductivity, small capacity, flame retardancy, non-toxicity, good water resistance and corrosion resistance. Surface

Product Details

Brief Description:
Install the transmitter, flow meter, temperature meter, etc. in the instrument incubator Precision instruments are mostly used in pipelines such as power plants and chemical plants. They are limited to ensure accurate data values and prolong the service life of instruments in harsh environments. The incubator is equipped with a power supply, a heater, a temperature control switch, and an instrument mounting bracket. It can also be equipped with internal lighting, heat supply outside the box, terminal block and power box. 1. On-site stainless steel instrument incubator has 20mm thick flame-retardant insulation layer on six sides. The material has the advantages of small thermal conductivity, small capacity, flame retardancy, non-toxicity, good water resistance and corrosion resistance. . The surface is protected by a galvanized or aluminum plate. The insulation structure of the box has the characteristics of simple construction, durability and good heat preservation. 2. The transmission is mounted in the cabinet and can be freely adjusted to the height level galvanized frame. The left, right, upper and lower coordinates can be adjusted by the elongated hole on the angle of the box column, which is convenient to install. 3. The pressure guiding tube introduced into the box can be inserted through the square hole of the rear side of the box, and then sealed by the tube-punching board, and the knock-out hole used at the end of the tube board is sealed with a sealing glue. 4. Stainless steel instrument protection The inside of the incubator has a lighting lamp on the top, with the switch control, the door is turned on, the door is turned off, and the maintenance is very convenient.

 

Inquiry