You are here: Home > news > Content
Connection method of explosion-proof flexible connecting pipe
- 2019-07-02-
< p="">

       Simply say explosion-proof flexible connecting tube<> is dedicated to cable or all kinds of data lines. In the environment of one district and two districts, there is a CBR series explosion-proof flexible connecting pipe because the cable is not exposed. When the device is explosion-proof flexible hose, pay attention to it. The connection method is to connect the hose with the equipment or the power supply before the normal operation of the equipment can be realized. Then, what should be done when the device is explosion-proof flexible connecting pipe? In the process of the device, it should be noted that what kind of problems are inevitable, and a good engine must have a good frame and the driver's operation to play its proper performance. How is the explosion-proof flexible connecting pipe connected in the device? First of all, to choose the method of connecting the explosion-proof flexible connecting pipe, first determine the threading method at the joint between the two sides of the diameter of the cable (pipe thread, NPT thread, threading method is inside and outside)
Next, During the connection process, the explosion-proof flexible connecting pipe should be straightened to thread the cable into the pipe, and then the explosion-proof union at one end of the hose is connected to the other end of the device to prevent the hose from being disconnected from the equipment cable. To secure the explosion-proof flexible connecting pipe, it can be screwed with the self-contained joints and equipment on the explosion-proof hose. Then it is also fixed on the other end of the hose to prevent the pipeline from being exposed to the sun for a long time. The connection method of the explosion-proof flexible connecting pipe is relatively simple. In the practical operation, the operator must prepare all the materials required in the pipe connecting device to facilitate the smooth operation in the device and prevent the data from being The preparation of the explosion-proof flexible connecting pipe is not completely complete and delays the details of the operation of the explosion-proof flexible connecting pipe. 1. When the equipment is installed on both ends of the explosion-proof flexible connecting pipe, it is not required to use a cable to seal the joint, and both ends of the hose are equipped with an explosion-proof joint. The performance of the pipeline for the manual equipment is good, and all the small details of the internal requirements of the pipeline can be handled well. When the equipment is used, the two ends of the pipeline are manually lifted, and then the construction personnel at the bottom of the tank are allowed to carry out the equipment. In the process of the equipment, the requirements apply to something, including ropes, rigs, and so on. 2. For the equipment of the explosion-proof flexible connecting pipe, it is necessary to pay attention to the equipment of the two ends of the thread along the direction of the other end of the equipment, so that the explosion-proof flexible connecting pipe does not present at both ends of the device during the operation. Loose, able to pass the cable very well. 3. After the explosion-proof flexible connecting pipe equipment is turned back, the length of the pipe should be adjusted accordingly. After adjustment, check the distance between the equipment and equipment or the equipment and the power supply, and try to keep the pipe vertical. To prevent the appearance of damaged appearance.