Stainless steel bridge pipe joint
Stainless steel bridge fittings are based on a superior variety of bridges. Focus on improvement in heat insulation, heat dissipation and fire protection. The structure adopts composite type, two-layer heat insulation, flame-retardant and fire-proof in the watch, and has the advantages of exhausting heat and self-extinguishing. The inner groove of the stainless steel bridge pipe joint is made of glass fiber reinforced plastic and has a variety of flame retardant materials. The exterior and exterior are coated with fireproof coating, and the horizontal burning, straight burning, dark heat length and other specifications reach the domestic and foreign level. . Fire endurance test: When the temperature in the furnace rises to 950 °, the back temperature is not higher than the test time of not less than 60 minutes.
Stainless steel bridge pipe joints are resistant to sulfuric acid, nitric acid, alkali, nitrate, etc. High tensile strength, good mechanical function, industrial bridges for laying cables and pipelines in chemical, electroplating and electro-chemical workshops such as sulfuric acid, nitric acid, alkali and nitrate, especially for environmental corrosion, high bearing capacity and resistance. Stainless steel bridge pipe joint pipe joints with high tensile strength, sensitive wiring, standardized equipment, and beautiful appearance, which are used in special places where bridges made of other materials are not suitable. The cable tray is widely used in the weak current system of intelligent buildings. It usually consists of multiple systems such as information monitoring and communication facilities. The cable trays are divided into trough, tray and ladder type structures. Pay attention to whether all the components of the bridge meet the requirements of serialization, generalization and standardization. The bridges in the building can be erected independently or attached to various buildings and pipe supports. The structure should be simple, beautiful in appearance, flexible in configuration and convenient in maintenance. All parts must be galvanized and installed in the building. The bridge outside the open air, if it is adjacent to the sea or belongs to the corroded area, the material must have anti-corrosion and moisture resistance. Cable trays are currently widely used in the construction industry, mainly including trough bridges, galvanized bridges, step bridges, and stainless steel bridge fittings.